Appearance: clear liquid
Product Specifications:
|
Active oxygen content, % |
7.4- 7.6 |
|
Peroxyester content, % |
74- 76 |
|
Hydroperoxides content (as TBHP), % max. |
0.2 |
|
Acidity (as isobutyric acid), % max. |
0.1 |
|
Chloride (Cl), % max. |
0.05 |
|
Water, % max. |
0.2 |
|
Immiscible (<1% W/W) |
in water |
|
Emergency temperature , °C |
20 |
|
Activity constancy |
6 months |
|
SADT °C |
27 |
| CAS
number |
109-13-7
|
USES:
This peroxyester is used as an initiator for the polymerization
of SAN/ABS and ethylene.
HAZARDOUS:
Organic peroxides may irritate eyes, skin and respiratory passages.
They are sensitive to heat, combustible and promote combustion.
If the ambient temperature increases, than the rate of decomposition
increases too. Above the critical temperature (SADT), spontaneous
decomposition may occur under conditions of restricted heat transfer
(e.g. in the supply container). Contact with concentrated acids and
alkalis, reducing agents or dirt, ash, rust and metal dust, also may
cause spontaneous decomposition. Under confinement this is explosion
risk. In case of decomposition without flame formation the vapor/air
mixture can explode.
PACKING:
The product is packed in polyethylene canisters with
net content of 20 kg.
STORAGE (TRANSPORT) TEMPERATURE CONTROLLED
Organic peroxide type D with temperature controlled UN 3115
Recommended : below + 10°C
Max. : + 10°C
This
information only concerns the above mentioned product and
does not need to be valid if used with other product(s) or
in any process. The information is to our best present
knowledge correct and complete and is given in a good faith
but without warranty .It remains the user's responsibility
to make sure that the information is appropriate and
complete for his special use of this product.
|
